Sure you have heard of the IP address many times and in many contexts that have to do with the internet, but what do you know about it? Check out what 192.168.36.1 IP address is and steps to login, to access the admin settings. The IP address is normally made up of four numerical blocks of up to three digits, called octets, which are separated by periods. The values of each block can vary between 0 and 255 and be one digit, two, or three.
The meaning of the acronym IP is Internet Protocol or internet protocol. This protocol has the function of establishing communications between all the devices that try to relate to each other on the internet. In other words, we could compare it to a Post Office service.
A device will not be capable to establish communications with anyone if it does not have one of these addresses.
The purpose of an IP address is to uniquely identify and locate every device on an internal or external network. It is a series of number that identifies an interface, which can be both a computer, Laptop, and a smartphone or any other electronic device that connects to the internet.
What Is a Public IP Address?
The public IP consists of a number that identifies your network from the outside. It’s your router or modems. This address can never be duplicated.
What Is a Private IP?
Private IP is one that identifies each of the devices connected to that network. For example, in a house, the router gives private IP addresses to each device (they vary, it is not always the same).
How to Login into 192.168.36.1
To log into the web interface of a network device, you will need a computer or laptop anyway.
In principle, you can log in from a tablet or phone, but first of all, it will not be very convenient – the router’s website is poorly optimized for mobile devices. And secondly, not all models can connect via WIFI without setting it up first.
So, the best thing to do is take a PC or laptop and connect using a network patch cable.
The step-by-step sequence of actions are:
Step 1. Open any web browser (Chrome, Opera, Firefox, Edge)
Step 2. In the address bar, enter the IP of the router 192.168.36.1 and press the “Enter” button. You can also click the link to directly open it http://192.168.36.1
If the web page doesn’t load that means it is not your router’s correct IP address. You need to find out the correct IP address of your router or read these steps How to find your Router’s IP Address.
Step 3. Enter the username and password. Default router username and passwords are “admin/admin“.
Step 4. Access router’s admin panel and change device settings.
Step 5. Save the configuration.
Troubleshooting 192.168.36.1
Facing issues while login?
Don’t worry you are not the only one; many users face this issue. Make sure that you have entered the correct IP that is 192.168.36.1 and not 192.168 36 1, 192.168.36 1, 192.168.36.I, http 192.168.36.1
1. Internet Stops Working Suddenly
The Wi-Fi signal appears to be working fine, but when you connect to the network you see that the internet connection has stopped working.
a. Cause: Internet issues in the router could cause such problems. This might be shown by the Internet LEDs on the router switching off or turning red, depending on the device you own.
Your router might be allocated a dynamic IP address. If the network is overloading or the router efficiency decreases due to some cause, it might send the communication of the new IP address, which causes internet failures.
b. Solution: Restart your router this will help to solve the issue via assigning a new IP address and if the problem was caused by an overloaded network, using this step should fix it.
2. Wi-Fi Connection Failure
You have turned on the router and enter the password correctly on your device but still, fail to establish the connection.
a. Cause: Wi-Fi range issues or interference can cause troubles in connectivity. Sometimes it is due to some minor technical glitches.
b. Solution: If you facing this issue then, try to “forget network” option on your device. Discover your Wi-Fi network again and re-enter the password.
Related Article: 192.168.1.256 IP Address, Login Username and Password
After Login Don’t Forget To:
Change the SSID
SSID is the name to identify your router on the network. Being the default name it is simpler for hackers to guess the login details.
Remember these points while changing SSID of a router
- Keep it short and unique
- Don’t use any personal information (name of router or password)
Got Questions, Read Below
Q. How to find your router’s ip address?
To find out the router IP address manually, follow the below steps:
For Windows users
- Open Command Prompt (CMD) Start > Search Box > cmd
- Type “ipconfig” and hit enter.
- Check for the default gateway. It’s your default IP address.
For macOS users
- Open Apple Menu in the top left and select ‘System Preferences’
- Open the network tab and select the network connection
- Click on Advance and click on TCP/IP
- You will find the IP address on the right.
Q. 192.168.36.1 not Working
If the above IP address is not working then there could be many reasons. Make sure that you have entered the correct IP address, router is connected to power, all wires are properly inserted.
Q. I forgot my router’s username and password
In this case use admin, admin.
If it doesn’t work then try resetting the router. To reset press the reset button for around 10 seconds till it starts blinking. Power Off and then power On router, now the router is reset to it’s original settings.
Other Popular IP Addresses
Conclusion
You need username and password to configure the settings of any router. Type http://192.168.36.1 in the address bar of your browser. After that enter the login details.
By following the above mentioned steps you can modify, delete or update the router settings as per your preference.
In case if you got stuck in the middle, do leave the comment below, we will reply with the best possible solution.
How can i change my ssid?
You can do it under wireless settings option.